Import of DXF file
If there is a construction available as a DXF file (e.g. created with AutoCAD® or other CAD application), it can be easily imported and used as a template for creation of a two dimensional component model .
To start the DXF file import, select the men File→Import→Acad-DXF.
The file browser shown provides the ability to search for DXF files. Select the DXF file to import and press "Open" or double click onto the file requested.
From AnTherm version 10.137 there is the possibility to import several DXF files into an existing project.
The DXF file is read in and all polylines are processed.
Prior to actual conversion you will be shown an import settings dialog.
The import settings dialog is used to control how the contents of the DXF file imported are interpreted by AnTherm.
You shall define by which attribute materials or conductivities shall be identified: either by layer name, the colour or the line type of each respective polyline. If no specific material grouping has been defined during creation of the DXF file, select "ignore".
The dialog displays the count of polylines adequate for import (after the refine-step) and corresponding layer-, line- and colour names which shall be used for either material name assignment or grouping (if there are no line types or layer names defined within the DXF file "NoLineType" or "NoLayerName" is used).
If the DXF file has been created with component grouping in mind also, then you can select this criteria within the block "group by".
The setting "optimize number of elements" shall be left checked in most cases. The number of elements resulting from the conversion and transferred to AnTherm will be kept as small as possible by merging resulting elements if applicable.
Check the field „Group polygons too“ only, and only then, if component areas surrounded by polylines within the DXF file shall be interpreted as component groups also.
Select the lowest number of decimal places sufficient to precisely read and interpret the geometry saved within the DXF file.
Press "Ok" to initiate the import of polylines and convert them to elements.
Concluding the import of geometry data you will be asked if material properties of materials currently stored in the material's list shall be applied (replaced) by name on all elements of the imported model.
Remark: One shall also include spaces, power sources etc. within the file to be imported and change the type of resulting elements later. Remark: Starting from Version 10 you have the possibility to import several 2D-DXF files into an existing project. Therefor position the imported elements by using "Transform / Move“, „Rotate / Window“, or by holding down the Ctrl key, the left mouse button and by dragging the mouse to move multiple elements.
Post processing of imported data
Because the imported DXF file provides only geometry data and naming of materials and groups, the data of the imported model must be post processed prior to further computations.
Post processing steps:
Remark: The order in which polylines are stored in (and thus also
imported from) DXF file does not follow the order they have been input within
Remark: If the import from a DXF file is not successful an error message will be shown. The resulting AnTherm project will be empty.